User contributions for Harry

15:4915:49, 9 September 2026 diff hist +1,319 Working with KOH No edit summary
15:2215:22, 9 September 2026 diff hist +30 HF safety →Before Starting
15:0115:01, 9 September 2026 diff hist −72 HF safety No edit summary
14:5214:52, 9 September 2026 diff hist +177 Working with KOH No edit summary
14:4914:49, 9 September 2026 diff hist +121 Working with KOH No edit summary
14:4314:43, 9 September 2026 diff hist +566 N Working with KOH Created page with "KOH belongs to the family of anisotropic Si-etchants based on aqueous alkaline solutions. The anisotropy stems from the different etch rates in different crystal directions. The {111}-planes are almost inert whereas the etch rates of e.g. {100}- and {110}-planes are several orders of magnitude faster. At NBI cleanroom, we use as standard a 28 wt% KOH solution. The etch rate and the selectivity towards a SiO2 mask depends on the temperature. We normally use a temperature..."
14:1614:16, 9 September 2026 diff hist +22 Safety →Safety topics

15:2315:23, 13 August 2026 diff hist +121 N Knowledge database for ALD Created page with "=ALD1= ==TMA (Al2O3)== ==TDMAHf (HfO2)== ==TTIP (TiO2)== =ALD2= ==TMA (Al2O3)== ==TDMAHf (HfO2)== ==TDMAZr (ZrO2)==" current
15:1615:16, 13 August 2026 diff hist 0 Cambridge ALD No edit summary
15:1515:15, 13 August 2026 diff hist +35 Cambridge ALD No edit summary
15:1115:11, 13 August 2026 diff hist +58 Edwards evaporator No edit summary current

15:0915:09, 30 June 2026 diff hist −10 Training No edit summary
15:0515:05, 30 June 2026 diff hist −146 Training →Plassys Evaporator
15:0515:05, 30 June 2026 diff hist +4 Training →Before the training session
15:0415:04, 30 June 2026 diff hist +6 Training →Before the training session
15:0415:04, 30 June 2026 diff hist +146 Training →Thin Film Deposition
14:5414:54, 30 June 2026 diff hist +2,946 N How to evaporate metals in AJA Created page with "=The genius remote= [https://e-beam.ferrotec.com/wp-content/uploads/sites/7/carrera_genius.pdf| The genius remote] is used to control the coils at the e-beam and manipulate the beam. There are two options: * '''Left joystick:''' controls the amplitude (''how much the beam oscillates'') * '''Right joystick:''' controls the beam position (''where the beam is located or where is the centre of the oscillation'') =Evaporation of metals= The following instructions are based..."

Navigation menu