Elionix 7000

From cleanroom
Revision as of 15:15, 1 October 2018 by Shiv (talk | contribs) (Official)
Jump to navigation Jump to search
Elionix 7000
Picture of Elionix 7000 text
Essentials
Full nameElionix EBL system
ManufacturerELIONIX INC.
DescriptionElectron beam lithography system
Location03.2.TBD
ManualTBD
Responsibility
PrimaryShiv
SecondaryPétur

Booking rules (last update: 11th Nov, 2014)

  • Between the hours of 9 am and 6 pm weekdays, every user is allotted a bank of 3 hours of bookable time.
  • You may distribute these 3 hours across several slots - three 1 hour slots or two 1.5 hour slots, etc
  • You may book only 3 hours on the system at a time (See the after hours exception)
  • This rolling bank system also means that once you use, say 1 hour of your allotted 3 hours, you can make a new 1 hour booking sometime later.
  • After hours exception: 9am-6pm weekdays are the normal hours and reservation outside these hours (after hours) are not governed strictly. However, if I see unfair usage of the tool in this period, I will intervene.

Only one booking allowed at a time between 9am-6pm on weekdays, no regulations outside of these hours. Last updated: 15 Apr 2014.

Manuals and Guides

Local Qdev versions - cheat sheet & detailed guide

Design PC

This is the PC in the Elionix room in the basement, next to the two racks with elionix hardware. You may use this PC to ready your design, convert to *.cell & *.con formats. The desktop has all the shortcuts to network folders (Design computers on the 4th floor, shared images from SEM PC and user folder from Exposure PC) and relevant software. Any files outsides the designated user folders (shortcut on desktop) can be deleted without warning. The login credentials are:

Username: Nanouser
Password:

The PC is labeled Elionix.