Lynx EVO stereomicroscope
 | |
| Essentials | |
|---|---|
| Full name | Lynx EVO |
| Manufacturer | Vision Engineering |
| Description | Stereomicroscope |
| Location | 03.1.111 |
| Responsibility | |
| Primary | Karolis |
Lynx EVO is a special microscope that gives sense of depth and has a large peripheral viewing angle due to its eyepiece-less design. It is mostly used to check your work after bonding and save a reference image.
The Lynx EVO shares the computer screen with the FS bonder.
The source PC can be switched by pressing Scroll Lock, Scroll Lock, Enter on the keyboard.
Troubleshooting
- I can't get a responsive image in the software!
- First close the uEye software. Make sure the Lynx EVO power supply is on. Then open the uEye software and press the "Play" button.
- Where's the PC screen? I want to save an image!
- The monitor is shared between the microscope and the bonder. Press
Scroll Lock, Scroll Lock, Enteron the keyboard.