Olympus microscopes - Revision history

Zhe at 20:01, 7 November 2025

2025-11-07T20:01:19Z

← Older revision		Revision as of 20:01, 7 November 2025
Line 6:		Line 6:
	\|description = Optical microscope		\|description = Optical microscope
	\|location = Cleanroom 1 (03.2.209A)<br />Cleanroom 2 (03.2.203B)		\|location = Cleanroom 1 (03.2.209A)<br />Cleanroom 2 (03.2.203B)
	\|primary = ~~Nader~~		\|primary = Harry
	\|secondary = ~~Karolis~~		\|secondary = Nader
	}}		}}
	There are Olympus BX metrology microscopes both in CR1 (BX51M) and CR2 (BX53M).		There are Olympus BX metrology microscopes both in CR1 (BX51M) and CR2 (BX53M).

Karolis: added link to Nikon scope

2022-05-09T12:48:35Z

added link to Nikon scope

← Older revision		Revision as of 12:48, 9 May 2022
Line 13:		Line 13:
	Objectives are 5x, 10x, 20x, 50x, 100x.		Objectives are 5x, 10x, 20x, 50x, 100x.
	Ultimate optical resolution (Rayleigh limit) of the 100x objective should be ~400 nm (at 550 nm wavelength).		Ultimate optical resolution (Rayleigh limit) of the 100x objective should be ~400 nm (at 550 nm wavelength).

			There is also a [[Nikon microscope]] with a similar feature set in CR1.

	If you want to resolve smaller features, you can use:		If you want to resolve smaller features, you can use:

Karolis: added link to resists

2022-05-09T07:41:14Z

added link to resists

← Older revision		Revision as of 07:41, 9 May 2022
Line 23:		Line 23:
	* [[Bruker Dimension Icon AFM]]		* [[Bruker Dimension Icon AFM]]

	If you want to observe photoresist, insert the green filter at the back of the microscope body.		If you want to observe [[Resists\|photoresist]], insert the green filter at the back of the microscope body.
	Otherwise white light will expose your resist.		Otherwise white light will expose your resist.

Karolis: /* Remote access */

2022-05-03T11:01:01Z

Remote access

← Older revision		Revision as of 11:01, 3 May 2022
Line 84:		Line 84:
	; The hand controller is not moving the stage!		; The hand controller is not moving the stage!
	: Verify that the install Märzhäuser Tango control software is installed.		: Verify that the install Märzhäuser Tango control software is installed.
			== Remote access ==
			* TeamViewer: SCOPE1, SCOPE2
			* LogMeIn: Scope 1 (CR1) [OSIS-CR1Olympus], SCOPE2 (CR2)
	[[Category:Tools]]		[[Category:Tools]]
	[[Category:Characterization]]		[[Category:Characterization]]

Karolis: /* Troubleshooting */ added fixes for vignetting, reversed axes, disabled controller

2022-05-03T08:38:13Z

Troubleshooting: added fixes for vignetting, reversed axes, disabled controller

← Older revision		Revision as of 08:38, 3 May 2022
Line 68:		Line 68:

	== Troubleshooting ==		== Troubleshooting ==
	; The corners of the image are dark!		; The corners of the image are dark (vignetting)!
	: There is a mechanical spring that holds the microscope components together. It needs to be tightened by service. Please notify CR staff.		: There is a mechanical spring that holds the microscope components together. It needs to be tightened by service. Please notify CR staff.
			: For a temporary fix make a flatfield correction: ''Acquire > Devices > Device Settings > camera (UC90) > Shading Correction > Flatfield''
	; Everything is green!		; Everything is green!
	: There is a green filter at the back of the microscope body. It is used to observe photoresist without exposing it.		: There is a green filter at the back of the microscope body. It is used to observe photoresist without exposing it.
Line 76:		Line 77:
	; The overview image is all jumbled up!		; The overview image is all jumbled up!
	: The axes of the motorized stage got inverted by the software gremlins. You can try to fix this or simply ask the CR staff.		: The axes of the motorized stage got inverted by the software gremlins. You can try to fix this or simply ask the CR staff.
			: Try: reverse X/Y axes in ''Acquire > Device Settings > Marzhauser Tango''
	; The image is completely frozen!		; The image is completely frozen!
	: Turn on live imaging with the big button on the right side of the ''Stream Motion'' software.		: Turn on live imaging with the big button on the right side of the ''Stream Motion'' software.
	; I can see a projection of the cleanroom lab in the image!		; I can see a projection of the cleanroom lab in the image!
	: Turn down the exposure/gain in the software and increase the light using the knob on the microscope body.		: Turn down the exposure/gain in the software and increase the light using the knob on the microscope body.
			; The hand controller is not moving the stage!
			: Verify that the install Märzhäuser Tango control software is installed.

	[[Category:Tools]]		[[Category:Tools]]
	[[Category:Characterization]]		[[Category:Characterization]]

Karolis: added general info, how to create an overview image, troubleshooting

2022-04-28T14:41:23Z

added general info, how to create an overview image, troubleshooting

@@ Line 1: / Line 1: @@
 {{Infobox tool
 |image = Tool Olympus BX51M.jpg
-|toolfullname = Olympus BX51M
+|toolfullname = Olympus BX51M<br />Olympus BX53M
 |website = http://www.olympus-ims.com/en/
 |company = Olympus IMS
 |description = Optical microscope
-|location = Cleanrooms 1 & 2
+|location = Cleanroom 1 (03.2.209A)<br />Cleanroom 2 (03.2.203B)
 |primary = Nader
 |secondary = Karolis
 }}
 [[Category:Tools]]
 [[Category:Characterization]]

Karolis: Karolis moved page Olympus BX51M to Olympus microscopes: two different models of Olympus microscopes

2022-04-28T13:51:29Z

Karolis moved page Olympus BX51M to Olympus microscopes: two different models of Olympus microscopes

← Older revision	Revision as of 13:51, 28 April 2022
(No difference)

Karolis at 19:43, 6 April 2022

2022-04-06T19:43:05Z

← Older revision		Revision as of 19:43, 6 April 2022
Line 9:		Line 9:
	\|secondary = Karolis		\|secondary = Karolis
	}}		}}

			[[Category:Tools]]
			[[Category:Characterization]]

Karolis: swapped responsibles

2020-09-11T08:31:53Z

swapped responsibles

← Older revision		Revision as of 08:31, 11 September 2020
Line 6:		Line 6:
	\|description = Optical microscope		\|description = Optical microscope
	\|location = Cleanrooms 1 & 2		\|location = Cleanrooms 1 & 2
	\|primary = ~~Karolis~~		\|primary = Nader
	\|secondary = ~~Nader~~		\|secondary = Karolis
	}}		}}

Karolis: updated infobox

2019-02-12T16:10:56Z

updated infobox

← Older revision		Revision as of 16:10, 12 February 2019
Line 6:		Line 6:
	\|description = Optical microscope		\|description = Optical microscope
	\|location = Cleanrooms 1 & 2		\|location = Cleanrooms 1 & 2
	\|primary = ~~Shiv~~		\|primary = Karolis
	\|secondary = Nader		\|secondary = Nader
	~~\|limits = None~~
	~~\|computer = TBD~~
	~~\|manual = TBD~~
	}}		}}